APG Audio UC118i Subwoofer

APG Audio UC118i Subwoofer

You must be logged in to be able to place orders

APG Audio UC118i Subwoofer

Technology for professionals and music lovers

bass speaker - Installation
Néodyme 1 x 18'' driver
4'' ventilated voice coil

Complex band-pass load

 

 

 



Active Audio UC118i Subwoofer

High technology for professionals and music lovers

The UC118i is a very low frequency subwoofer. It is fitted with one convection cooled Neodymium 18" transducer loaded by a double interactive chamber acoustic load.

This type of load results a 3 dB gain before feedback and reduced distortion thanks to excellent control over the diaphragm displacement. This, combined with the convection cooling technology used with the neodymium woofer, means that thermal compression is reduced by nearly 2 dB. All these optimizations lead to impressive dynamics and avery high maximum SPL.

The ergonomics of the UC118i are particularly well developed to enable easy mounting a maximum of 3 subwoofers. The enclosure features a fully integrated 2-point rigging system, recessed handles, two rear connectors and two front connectors dedicated to wiring of cardioid configurations. The subwoofers are attached to each other our ELK (Easy Link Kit) connection piece. The BUMPER allows the suspended use of all UC118i subwoofers (3 UC118i max). The use of APG digital processor is mandatory for UC118i.

Technical features

Usable bandwidth

(± 10 dB)

 

SPL max @ 1m

 

Nominal directivity (H° x V°)

 

Nominal impedance

25 Hz - 80 Hz

 

 

140 dB SPL (1)

 

Omnidirectionnal (2)

 

8 ohm

Transducers

Topology

Type of load

Way and amplification section

1 x 18'' Neodyme

-

Bandpass dual chamber - Bass Reflex - Laminar

1 way, mono amplified

AES power (W)

Maximum power handling (W)

1100 W (3)

3600 W (4)

Dimensions H,W,D (mm)

Weight (kg)

Connectors

IP

27,7" x 20,8" x 29,7" (704 x 530 x 755 mm)

110,2 lb (50 kg)

4 x Speakon NL4MP

43

 

(1) Peak level @ 1m, 2πsr using 12dB crest factor pink noise with APG preset (2) Nominal directivity @-6dB (3) Continuous power according to AES2-2012 in DCR (4) Peak power according to AES2-2012 in DCR (5)

SPEAKON connectors are wired hot pin 1+, cold pin1- (2+ and 2- are not connected)

 

 

Title Type Size Download
QUICK-START_UC118i.pdf PDF 1.04MB Download
UC118i_2D_drawings.pdf PDF 181.70KB Download
UC118i_APG.pdf PDF 372.35KB Download
UC118i_user_manual_EN_C.pdf PDF 5.67MB Download