APG Audio UC206N Line Array
The UC206N Uniline Compact line array incorporates 3-way acoustic design. The Lo/Mid section is fitted with two 6.5" cone drivers loaded in compression and optimized for low frequency reproduction.
Mid/ Hi coherency comes coaxial device fitted with 5" and 0.5" Neodymium drivers mounted to an Isotop15TM waveguide. This IsotopTM load employs an active annular horn and iso-phase plug to achieve acoustic impedance adaptation and performance comparable to traditional compression drivers, but with greatly increased bandwidth and power handling. Twin 6.5" loudspeakers serve Lo/Mid bandwidth between 80Hz and 450Hz. The mid-range 5" speaker displays ultra-low distortion and extends from 450 Hz to 5 kHz. The 0.5" HF driver operates smoothly from 5 kHz to 20 kHz.
Directivity control, compression, transducer phase alignment and protection are all established through the UC206’s advanced acoustic horn. The mechanical system is totally captive and allows use of Uniline Compact either rigged or stacked.
The Uniline Compact is the only compact system fitted with 3 acoustic ways that differ by their horizontal coverage angle: 70° for the UC206N to highlight the long throw capacity as well as intelligibility, and 105° for the UC206W to highlight the opening, the stereo image and the suitability for spatial and immersive sound system (i.e. WFS concept).
The Uniline Compact offers an exceptional size / power ratio and a low frequency cut-off extended down to 65Hz. The bass section can be extended in the lows down to 65Hz without compromise while the high section works on a narrower bandwidth higher in frequency and higher in power handling.
UC206N Horizontal coverage angle 70°-> Unique on the market Short to mid/long throw outdoor and high intelligibility indoor
| Technical features | |
|---|---|
|
Usable bandwidth (± 10 dB)
SPL max @ 1m
Nominal directivity (H° x V°)
Nominal impedance |
55 Hz - 20 kHz
134 dB SPL (1)
70° x 15° (2)
16 ohm |
|
Transducers Topology Type of load Way and amplification section |
2 x 6,5'' ND with ventilated driver - 1 x Isotop15 (5''ND / HF 1'') Line Source - Isotop / K-Horn Bass Reflex - Line Source / Isotop / Constant directivity 3 ways, bi-amplified |
|
AES power (W) Maximum power handling (W) |
lo/mid : 300 W (3) mid/hi : 100 W lo/mid : 1200 W (4) mid/hi : 400 W |
|
Dimensions H,W,D (mm) Weight (kg) Connectors IP |
8,2" x 21,2" x 16,1" (210 x 540 x 410 mm) 36,3 lb (16,5 kg) 2 x Speakon NL4MP (5) 43 |
(1) Peak level @ 1m, 2πsr using 12dB crestfactor pink noise with APG preset (2) Nominal directivity @-6dB (3) Continuous power according to AES2-2012 in DCR (4) Peak power according to AES2-2012 in DCR (5) SPEAKON connectors are wired hot pin 1+, cold pin 1- (2+ and 2- are not connected)
